CONCRETE PIPE MAKING MACHINE IS THAT ROLLER AXIS SUPPORT PIPE MOULD AND PRESS CONCRETE INSIDE THE PIPE MOULD, WHEN PIPE MOULD WITH ROLLER AXIS ROTATES IN HIGH SPEED, THE CONCRETE BECOMES SOLID PIPE BY ACTION OF ROLLER PRESS AND FUGAL FORCE. USUALLY THREE TYPES PIPE AS FOLLOWING INTRODUCTION:

1) FLAT JOINT

 FLAT PIPE IS AN JOINT FORM OF CEMENT PIPE EARLIER, WHICH IS EASY MANUFACTURE, HIGH IN PRODUCTION EFFICIENCY AND LOW IN MANUFACTURING COST; THE INTERFACE SEALING ADOPTS STEEL MESH CONCRETE RAG TAPE IS A RIGID CONNECTION, BUT ITS SEALING EFFECT AND SEISMIC PERFORMANCE ARE POOR. IF THE FOUNDATION DISPLACEMENT CAUSES THE INTERFACE TO BE OPENED, THE SEWAGE WILL POLLUTE THE UNDERGROUND SOIL, CAUSING GREAT SOCIAL AND ENVIRONMENTAL INCONVENIENCE, SO THIS INTERFACE IS USED LESS.

2)SOCKET JOINT

THE SOCKET TYPE INTERFACE ADOPTS RUBBER RING SEAL TO STOP WATER, WHICH IS FLEXIBLE CONNECTION. THE INTERFACE INSERTION DEPTH IS 80-100MM, AND THE INTERFACE HAS A RELATIVE ROTATION ANGLE OF 1.5°. THE CEMENT PIPE OF THIS INTERFACE HAS GOOD SEISMIC PERFORMANCE. THE PIPE BASE IS MADE OF SANDSTONE FOUNDATION OR CONCRETE FOUNDATION. HIGH SPEED IN INSTALLATION. HOWEVER, LARGE-DIAMETER CEMENT PIPES ARE NOT SUITABLE FOR SOCKET-TYPE INTERFACES BECAUSE LARGE-MOUTH CEMENT PIPES PRODUCE CIRCUMFERENTIAL CRACKS.

3)FLEXIBLE RABBET JOINT

THE FLEXIBLE RABBET JOINT FORM IS MAINLY SUITABLE FOR CEMENT PIPES WITH A DIAMETER OF ≥D1200. THE INTERFACE FORM IS ALSO A FLEXIBLE CONNECTION. THE INTERFACE HAS THE ADVANTAGES OF A SOCKET TYPE AND IS MORE PROMINENT THAN THE SOCKET TYPE, BUT IT ALSO HAS A REMARKABLE FEATURE THAT THE SOCKET TYPE IS NOT SUITABLE FOR THE LARGE DIAMETER PIPE.. THE DEPTH OF THE SOCKET PIPE JOINT IS NOT EASY TO CONTROL, AND IT IS NOT EASY TO BE DENSE WHEN BACK FILLING. THE STRESS AT THE TRANSITION OF THE PIPE SOCKET IS CONCENTRATED. IN SERIOUS CASES, THE PIPE BODY WILL HAVE CIRCUMFERENTIAL CRACKS, WHICH WILL AFFECT THE SERVICE LIFE OF THE PIPE. THE PIPE BODY OF THE FLEXIBLE JOINT PIPE HAS GOOD CONTACT WITH THE FOUNDATION. IT IS EVENLY LOADED WHEN SUBJECTED TO LOAD FORCE, SO IT IS SAFER TO USE; THE OUTER WALL OF THE SOCKET OF THE SOCKET TUBE IS A SLOPED SURFACE, SO IT IS DIFFICULT TO CONTROL THE LEAKAGE WHEN BUILDING THE INSPECTION WELL, SO THE FLEXIBLE RABBET TUBE WILL BE IMPROVED A LOT; THE RABBET TUBE CAN ALSO BE USED AS A TOP TUBE.

CEMENT CONCRETE CULVERT PIPE MAKING MACHINE IS IDEAL EQUIPMENT WHICH PRODUCE CEMENT PIPES. IT'S WITH REASONABLE DESIGN, BEAUTIFUL APPEARANCE, RELIABLE OPERATION, EASY TO OPERATE,ETC. CONCRETE PIPES PRODUCED BY THIS MACHINE HAVE CHARACTERISTICS AS FOLLOWS:

INSIDE AND OUTSIDE WALLS ARE SMOOTH; HARD TO BE PERMEATED; HIGH COMPRESSIVE STRENGTH, LOW PRICE, JOINTS ARE SOLID AND RELIABLE;
EASY TO OPERATE, HIGH PRODUCTION EFFICIENCY.
ITS PRODUCTS ARE WIDELY APPLIED IN THE FARM IRRIGATION, DRAINAGE, QUALITY IS VERY RELIABLE.

THIS KIND OF EQUIPMENT IS MADE GOOD USE OF THE ROTARY ROLLING METHOD TO ROLL THE CONCRETE IN THE PIPE MOLD TO PRODUCE VARIOUS
CONCRETE CEMENT PIPES. THE PRODUCTION PROCESS IS PRACTICAL, RELIABLE AND WIDELY USED IN DRAINAGE WORKS.

THE MAIN FEATURES OF THE EQUIPMENT MADE BY OUR FACTORY:

1) EQUIPPED WITH SPEED REGULATING MOTOR OF HIGH-PERFORMANCE, WITH REDUCE VOLTAGE DEVICE TO MAKE SURE STABLE AND RELIABLE POWER.

2) THE MACHINE ADOPTS COMBINED FRAME STRUCTURE (EXCEPT BIGGER MACHINES), WHICH HAS GOOD STABILITY, EASY TO INSTALL, CONCRETE MATERIALS CAN BE FED BY MEN OR BY MECHANICAL FEEDER.
3) THE DRIVING MODE ADOPTS TWO STRONG POINTS OF DRIVING MODE AND ELIMINATING ADDITIONAL BENDING MOVEMENT OF THREE POINT DRIVE. IT MAKES THE OPERATION MORE REASONABLE AND RELIABLE, AND GREATLY REDUCES THE ACCIDENT RATE.

4) THE MATERIAL OF THE RETAINING RING AT BOTH SIDES OF THE PIPE MOLD IS STANDARD STEEL CASTING. THE MOLD BODY HAS GOOD RIGIDITY AND IS NOT EASY TO DEFORM. THE SCREW FOR TURNOVER JOINT IS TIGHT, RELIABLE AND CONVENIENT. IT CAN PROCESS DIFFERENT SIZE AND SHAPE
OF PIPE MOLDS ACCORDING TO THE REQUIREMENTS.

5) THE SIZE AND SHAPE OF THE CEMENT PIPES ARE VARIOUS: THE INNER DIAMETER IS FROM 200MM TO 2500MM, THE LENGTH IS FROM 0-4M, AND JOINT TYPES ARE FLAT, RIGID TONGUE AND GROOVE, FLEXIBLE TONGUE AND GROOVE, RIGID SOCKET, FLEXIBLE SOCKET, STEEL SOCKET, DUAL
SOCKET, PERFORATED PIPE AND SO ON.